Oki MB451 - Deleting Specified Destinations

Basic Procedure for Faxing
-87-
Faxing (for MB451, MB451w, MB471, MB471w, MB491, ES4191 MFP only)
3
Using Transmission and Reception
History
You can select a destination from the 50 most
recent transmissions or receptions.
1 Press the to select [Tx History] or
[Rx History] and then press .
2 Press the to select an entry and then
press .
The check box is selected. You can select multiple
entries.
3 When you have selected all the
destinations, press the .
4 Check that [Complete] is selected and
then press .
Using One-Touch Key Pad
The one-touch key pad can hold fax numbers
registered in Speed Dial List.
The speed dials no.1 to 16 are automatically
registered to the one-touch key pad.
1 Press the desired one-touch key on the
start screen.
Press the <SHIFT> key to select the speed dials
no.9 to 16 assigned to the one-touch key pad.
Memo
 You can use the one-touch key pad also on the screen that
is displayed after pressing the <FAX/HOOK> key. In this
case, the fax standby screen appears after pressing a one-
touch key so that you can configure other advanced
settings for fax functions.
Deleting Specified Destinations
1 Select the specified destination on the
fax start screen by pressing and then
press .
2 Press the to select a destination you
want to delete and then press .
The check box is selected. You can select multiple
entries.
3 When you have selected all the
destinations to be deleted, press .
4 Check that [Delete The Address] is
selected and then press .
- If all recipients have been deleted, you will be
taken back automatically to the start screen.
- If not all recipients have been deleted, press to
go back to the start screen.
OK
OK
OK
OK
OK
OK