Oki MB451 - Page 33

Loading Paper and Documents
-33-
Setup
1
 Loading Paper in Tray 1 and Tray 2
The following procedure explains how to load
paper in tray 1 or tray 2 (optional).
Memo
 The following procedure uses tray 1 as an example but the
same is applied to tray 2.
1 Pull out the paper tray.
2 Slide the paper guide (1) to the width of
paper to be loaded.
3 Slide the paper stopper (2) to the length
of paper to be loaded.
MP Tray
(MB451/
MB451w/
MB471/
MB471w/
MB491/
ES4191 MFP)
 A4
 A5
 B5
 A6*
 Letter
 Legal 13
 Legal 13.5
 Legal 14
 Executive
 Statement*
 16K (184 x 260 mm)
 16K (195 x 270 mm)
 16K (197 x 273 mm)
 Custom
 Com-9 Envelope*
 Com-10 Envelope*
 Monarch Envelope*
 DL Envelope*
 C5 Envelope*
 C6 Envelope*
 100 sheets
(when paper weight is
80 g/m
2
)
 10 envelopes
 Light
60 to 63 g/m
2
(16 to 17 lb)
 Medium Light
64 to 74 g/m
2
(18 to 19 lb)
 Medium
75 to 87 g/m
2
(20 to 23 lb)
 Medium Heavy
88 to 104 g/m
2
(24 to 27 lb)
 Heavy
105 to 122 g/m
2
(28 to 32 lb)
 Ultra Heavy
123 to 163 g/m
2
(33 to 43 lb)
Manual Feeder
(MB441/
MB461/
ES4161 MFP)
 1 sheet
 1 envelope
Tray
Supported paper
size
Paper capacity Paper weight
1
2