Connecting to a Computer
-55-
Setup
1
Next, install the driver in the computer.
1 Insert the "Software DVD-ROM" into the
computer.
2 Double-click the [OKI] icon on the
desktop.
3 Double-click [Driver] > [Printer] >
[Installer for MacOSX].
4 Enter the administrator password, and
then click [OK].
Follow the instructions displayed on the screen to
complete the installation.
5 From the Apple menu, select [System
Preferences].
6 Click [Print & Fax].
7 Click [+].
8 Click [AppleTalk].
9 Select the name of your machine and
then check that [OKI MB491(PS)] is
displayed in [Print Using].
10 Click [Add].
11 Check that your machine is displayed in
[Printers] and [OKI MB491(PS)] is
displayed in [Kind].
If [OKI MB491(PS)] is not correctly displayed in
[Kind], click [-] to remove your machine from [Print
& Fax] and then redo the procedure from steps 7 to
10.
12 Close [Print & Fax].
13 Remove "Software DVD-ROM" from the
computer.
The installation is complete.
To Next Page
Loading...
