Oki MB451 - Page 68

Configuring the Network Settings
-68-
3 Select [See the name of this
computer] under [System].
4 Enter the name in [Computer name] in
C-1 of the Setup Information Form.
5 Close the window.
 For Windows Server 2003 and
Windows XP
1
click [start] > [Control Panel] >
[Performance and Maintenance] >
[System].
For Windows Server 2003, click [Start] >
[Operator panel] > [System].
2 Select the [Computer Name] tab and
then click [Change].
3 Enter the name in [Computer Name] in
C-1 of the Setup Information Form.
4 Click [Cancel] to close the window.
 For Mac OS X
1 From the Apple menu, select [System
Preferences].
2 Click [Sharing].
3 Enter the name in [Computer Name] in
C-1 of the Setup Information Form.
Memo
 If the computer name is over 16 characters, for Mac OS X
10.4.11 enter the first 15 characters in C-1. For Mac OS X
10.5-10.6, select the network service you are using from
[System Environment Settings] > [Network], and
enter the NetBios field name into C-1 within WINS in
Detailed Settings.
4 Close [Sharing].
Determining the Names of the Items
Required for Scan To Network PC
Determine the names of the following items and
fill in C-2 to C-6 on the Setup Information Form.
 User name to log into the destination computer (C-2)
Note
 If the username is managed on the domain, enter
"Username@Domainname" in C-2. To check the
domain name, click on [Change] within the
[Computer Name] tab in the [System Properties]
dialogue box.
 Password to log into the destination computer (C-3)
 Profile name to register the settings on your
machine (C-4)
 Shared folder name on the destination computer
(C-5)
 File name of the scanned data (C-6)
Configuring the Computer for Scan
To Network PC
With the setup information form, create an
account and shared folder for the machine in the
computer.
Memo
 If the computer is in a domain, the procedure for adding a
user account may be different to the procedure below.
Refer to the Microsoft Windows manual.
 For Windows 7, Windows Server
2008 R2, Windows 2008 and Win-
dows Vista
1
Click [Start] > [Control Panel].
2 Select [Add or remove user
accounts].
3 Select [Create a new account].
C-1
C-1