44292401TH Rev.1
111 /
Oki Data CONFIDENTIAL
ADJUSTMENT/SETTING
L. LDAP PASSWORD
M. DOMAIN NAME
12.4.6 USB SETTING
12.4.7 COMM. SETTING
A. TONE/PULSE
B. LINE MONITOR
Function • To set the password for connecting to LDAP server.
Use • To set the password for connecting to LDAP server.
Setting/
procedure
1. Select the [LDAP PASSWORD], then press Select key.
2. Type in the password, then press Select key.
• The password can contain a maximum of 32 characters.
Function • To set the domain name for connecting to LDAP server.
Use • To set the domain name for connecting to LDAP server.
Setting/
procedure
1. Select the [DOMAIN NAME], then press Select key.
2. Type in the domain name, then press Select key.
• The domain name can contain a maximum of 64 characters.
Function
• To set the operating system of the PC to which this machine is connected with a USB
cable.
Use
Setting/
procedure
• The default setting is Windows.
“Windows” / Mac
Function • This function can be used to specify the dialing system. If this function is not correctly
set to the type of dialing system used, faxes cannot be sent. Select the correct setting
after checking which type of dialing system is used by your telephone line.
• There are two types of telephone dialing systems: tone dialing (PB) and pulse dialing
(DP10pps or DP20pps). Faxes cannot be sent if this machine is not set to the system
used by your telephone line. Select the correct setting after checking which type of dial-
ing system is used.
NOTE
• If [PTT SETTING] in the [USER SETTING] menu is set to U.S.A, CANADA or NEW
ZEALAND, the settings cannot be changed.
Use
Setting/
procedure
• The default setting is TONE.
“TONE”: Tone line
PULSE 10pps: Pulse line of 10 pps
PULSE 20pps: Pulse line of 20 pps
Function
• This function can be used to set the volume when monitoring communication to [HIGH],
[LOW] or [OFF].
Use
Setting/
procedure
• The default setting is LOW.
OFF / “LOW” / HIGH
C. PSTN/PBX
12.4.8 USER SETTING
A. PTT SETTING
B. DATE & TIME
C. DATE FORMAT
Function • This function can be used to set whether the connected telephone wiring is a public
switched telephone network (PSTN) or a private branch exchange (PBX).
For a PBX system, the outside line access number (or extension number) must be spec-
ified.
• The connected wiring system can be set to either PSTN (Public Switched Telephone
Network) or PBX (Private Branch Exchange). For a PBX system, the outside line access
number (or extension number) must be specified. The outside line access number (or
extension number) is programmed in the [#] key.
Use
Setting/
procedure
• The default setting is PSTN.
“PSTN”: Public Switched Telephone Network
PBX: Private Branch Exchange
Function • Sets the country where this machine is installed.
Use • To change the country where this machine is installed.
Setting/
procedure
• The default setting is USA.
“U.S.A” / UNITED KINGDOM / VIETNAM / ARGENTINA / AUSTRALIA
AUSTRIA / BELGIUM / BRAZIL / CANADA / CHINA / CZECH / DENMARK
EUROPE / FINLAND / FRANCE / GERMANY / GREECE / HONG KONG
HUNGARRY / IRELAND / ISRAEL / ITALY / KOREA / MALAYSIA / MEXICO
THE NETHERLANDS / NEW ZEALAND / NORWAY / PHILIPPINES / POLAND
PORTUGAL / RUSSIA / SAUDI ARABIA / SINGAPORE / SLOVAKIA /
SOUTH AFRICA / SPAIN / SWEDEN / SWITZERLAND / TAIWAN / TURKEY
NOTE
When this setting was changed, the following settings will return to their default
automatically.
• [LANGUAGE]
• [PAPER SETUP]
• [DATE FORMAT]
• [PRESET ZOOM]
• [SOFT SWITCH]
Function • Sets the date and time to be indicated on the output of print report.
Use • At the installation or when date and time need to be changed.
Function • Sets the format of the date to be indicated on the output of PRINT REPORT.
Use • To change the format of the date to be indicated on the output of PRINT REPORT
Setting/
procedure
• The default setting is MM/DD/YY.
“MM/DD/YY” / DD/MM/YY / YY/MM/DD
11.4.7 USER SETTING
11.4.5 USB SETTING
11.4.6 COMM. SETTING
To Next Page
Loading...
Need help?
General
