Oki MC160MFP Maintenance Manual

44292401TH Rev.1
119 /
Oki Data CONFIDENTIAL
ADJUSTMENT/SETTING
12.10.6 DENSITY LEVEL
Function
• Select the scan data density that is used as a default.
Use
Setting/
procedure
• The default setting is .
(LIGHT) -2 / -1 / “0” / +1 / +2 (DARK)
13. User service mode
13.1 User service mode function tree
A. Procedure
1. Select [UTILITY] with the S/T key and press the Select key.
2. Keep on pressing W key over two seconds.
B. Exiting
• Press the Stop/Reset key.
NOTE
• <*1>: If engine is EU type, this item doesn’t display.
MAINTENANCE
Ref.
page
FAX MAINTENANCE TX SPEED
P. 120
RX SPEED
TX LEVEL
RX LEVEL
DTMF LEVEL
CNG LEVEL
CED LEVEL
ECM MODE
CODING SCHEME
TONER EMPTY REPORT
PROTOCOL REPORT
GDI TIMEOUT
TWAIN TIMEOUT
ENERGY SAVE MODE <*1>
ADJUST CIS MAIN ZOOM
P. 1 2 0
CIS SUB ZOOM
CIS MAIN REGIST
CIS SUB REGIST
ADF SUB ZOOM
ADF MAIN REG
ADF SUB REG
FLICKER
TOP ADJUSTMENT PLAIN PAPER
THICK
ENVELOPE
LEFT ADJ. (FRONT) LEFT ADJ TRAY1
LEFT ADJ TRAY2
LEFT ADJ. (BACK) LEFT ADJ TRAY1
LEFT ADJ TRAY2
12. User service mode
12.1 User service mode function tree
11.10.6 DENSITY LEVEL
13. User service mode
13.1 User service mode function tree
A. Procedure
1. Select [UTILITY] with the S/T key and press the Select key.
2. Keep on pressing W key over two seconds.
B. Exiting
• Press the Stop/Reset key.
NOTE
• <*1>: If engine is EU type, this item doesn’t display.
MAINTENANCE
Ref.
page
FAX MAINTENANCE TX SPEED
P. 120
RX SPEED
TX LEVEL
RX LEVEL
DTMF LEVEL
CNG LEVEL
CED LEVEL
ECM MODE
CODING SCHEME
TONER EMPTY REPORT
PROTOCOL REPORT
GDI TIMEOUT
TWAIN TIMEOUT
ENERGY SAVE MODE <*1>
ADJUST CIS MAIN ZOOM
P. 1 2 0
CIS SUB ZOOM
CIS MAIN REGIST
CIS SUB REGIST
ADF SUB ZOOM
ADF MAIN REG
ADF SUB REG
FLICKER
TOP ADJUSTMENT PLAIN PAPER
THICK
ENVELOPE
LEFT ADJ. (FRONT) LEFT ADJ TRAY1
LEFT ADJ TRAY2
LEFT ADJ. (BACK) LEFT ADJ TRAY1
LEFT ADJ TRAY2

Oki MC160MFP Specifications

General

Brand	Oki
Model	MC160MFP
Category	All in One Printer
Language	English