44292401TH Rev.1
117 /
Oki Data CONFIDENTIAL
ADJUSTMENT/SETTING
12.8.4 RX PRINT
12.8.5 RX MODE
Oficio
OFF
Less than 335 mm 1 page
336 mm to 359 mm Print into 1 page. 1 mm to 24 mm of end is cut.
360 mm to 662 mm Divide into 2 pages
663 mm to 686 mm Divide into 2 pages. 1 mm to 24 mm of end is cut.
687 mm to 989 mm Divide into 3 pages
990 mm or more Divide into 3 pages (or more). 1 mm to 24 mm of end is cut.
ON
Less than 331 mm 1 page
332 mm to 355 mm Print into 1 page. 1 mm to 24 mm of end is cut.
356 mm to 654 mm Divide into 2 pages
655 mm to 678 mm Divide into 2 pages. 1 mm to 24 mm of end is cut.
679 mm to 977 mm Divide into 3 pages
978 mm or more Divide into 3 pages (or more). 1 mm to 24 mm of end is cut.
Recording
media size
Footer
Length of
received image
Printing
Function • This function can be used to set whether the fax is only printed after all document pages
have been received [MEMORY RX] or printing begins as soon as the first page of the
document is received [PRINT RX].
Use
Setting/
procedure
• The default setting is MEMORY RX.
“MEMORY RX”: Printed after all document pages have been received.
PRINT RX: Printing begins as soon as the first page of the document is received.
Function • This function can be used to set the reception mode to automatic reception [AUTO RX]
or manual reception [MANUAL RX].
• Automatic reception: Automatically begins receiving after the set number of rings.
• Manual reception: Does not automatically receive the fax. Reception begins after mak-
ing a connection by picking up the telephone receiver or pressing the On hook key, then
pressing the Start key.
Use
Setting/
procedure
• The default setting is AUTO RX.
“AUTO RX”: Automatic reception
MANUAL RX: Manual reception
12.8.7 FOOTER
A. Attaching footer print
When footer is selected ON, it is printed at the end of printable area. 4 mm line area from
the end of printable area is kept for printing footer. It should be attached on footer area
regardless of image length. If the received image is divided into 2 pages or more, footer is
printed in the specified location of all the recording sheets of media printed.
Image data area:
The received image data is printed on the area except for 12 mm from recording media
size. (No printable area: 8 mm (
1
/
3
in) + footer area: 4 mm (
1
/
4
in)) The following table is the
image printable area of each recording media size due to setting of footer print.
Function • This function can be used to set whether or not the received document is forwarded.
NOTE
• In order to forward the document to an e-mail address, the optional image control-
ler or network interface card is required.
Use
Setting/
procedure
• The default setting is OFF.
“OFF” / ON / ON (PRINT)
ON: The received document is forwarded to the specified fax number or e-mail address.
ON (PRINT): The received document is printed by this machine at the same time that it is
forwarded to the specified fax number or e-mail address.
Function
• This function can be used to set whether or not the reception information (date received,
number of pages, etc.) is printed at the bottom of each received document.
Use
Setting/
procedure
• The default setting is OFF.
“OFF”: No footer
ON: Add footer
Media length
Footer OFF Footer ON
Image data area Image data area Footer area
A4S 297 mm 289 mm 285 mm +4 mm
LetterS 279 mm 271 mm 267 mm +4 mm
Legal 356 mm 348 mm 344 mm +4 mm
Oficio 343 mm 335 mm 331 mm +4 mm
11.8.7 FOOTER
11.8.6 FORWARD
11.8.4 RX PRINT
11.8.5 RX MODE
To Next Page
Loading...
Need help?
General
