44292401TH Rev.1
13 /
Oki Data CONFIDENTIAL
SAFETY INFORMATION
The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Admin-
istration implemented regulations for laser products manufactured since August 1, 1976.
Compliance is mandatory for products marketed in the United States.
This copier is certified as a "Class 1" laser product under the U.S.
Department of Health and Human Services (DHHS) Radiation Performance Standard
according to the Radiation Control for Health and Safety Act of 1968. Since radiation emit-
ted inside this copier is completely confined within protective housings and external covers,
the laser beam cannot escape during any phase of normal user operation.
SAFETY INFORMATION
IMPORTANT NOTICE
4.3 Laser Caution Label
• A laser caution label is attached to the outside of the machine as shown below.
4.4 PRECAUTIONS FOR HANDLING THE LASER EQUIPMENT
• When laser protective goggles are to be used, select ones with a lens conforming to the
above specifications.
• When a disassembly job needs to be performed in the laser beam path, such as when
working around the printerhead and PC Drum, be sure first to turn the printer OFF.
• If the job requires that the printer be left ON, take off your watch and ring and wear laser
protective goggles.
• A highly reflective tool can be dangerous if it is brought into the laser beam path. Use
utmost care when handling tools on the user’s premises.
• The Print Head is not to be disassembled or adjusted in the field. Replace the Unit or
Assembly including the Control Board. Therefore, remove the Laser Diode, and do not
perform Control Board trimmer adjustment.
M
A0HFP0C501DA
SAFETY INFORMATION
IMPORTANT NOTICE
To Next Page
Loading...
