Oki MC160MFP - Page 57

44292401TH Rev.1
56 /
Oki Data CONFIDENTIAL
OUTLINE
OUTLINE
1. Product Specifications
A. Type
OPM: Originals per minutes
B. Functions
C. Paper
D. Maintenance
Name Automatic Document Feeder
Installation Inserted at upper-rear side of main body
Document alignment Center
Document loading Face up
Scan speed
Color (600 x 300 dpi) 3.0 opm
Monochrome (600 x 300
dpi)
10 opm
Monochrome (300 x 300
dpi)
20 opm
Modes 1-Sided Mode / 2-Sided Mode
Type of document
1-Sided mode: 50 g/m
2
to 128 g/m
2
2-Sided mode: 50 g/m
2
to 128 g/m
2
Detectable document size
A5S, B5S, A4S, LegalS (8.5 x 14), LetterS (8.5 x 11), Invoice (8.5 x 5.5)
Width 140 to 216 mm
Length 148 to 355.6 mm
Capacity
35 sheets (80 g/m
2
) or load height of 6 mm or less.
Machine durability 50,000 originals feed or 5 years, whichever comes first
OUTLINE
1. Product Specifications
E. Paper feed prohibited originals
• The following types of originals should not be used.
F. Paper feed not guaranteed originals
• If fed, paper feed will be possible to some extent but trouble occurrence will be possible.
G. Machine specifications
H. Operating
• Conforms to the operating environment of the main body.
NOTE
These specifications are subject to change without notice.
Types of document Possible malfunctions
Original that is stapled or clipped.
Feed failure, damage to the original, or drive
failure due to clip clogging
Pasted originals
Misfeed, broken original, or folded paste-up
edges
Book original
Feed failure, damage to the original, or drive
failure
Original weighing less than 35 g/m
2
or
210 g/m
2
or more
Feed failure
Torn original Feed failure, damaged sheet
Highly curled original (15 mm or more) Original misfeed due to dog-ear or skew
OHP transparencies Feed failure
Label Sheet Feed failure
Photographic paper, gloss enamel paper, or other gloss
original
Feed failure, damage to the original, or drive
failure
Offset master Feed failure
Sheets clipped or notched Damaged sheet
Less-than-0.05-mm-thick thin paper Misfeed
More-than-0.15-mm-thick thin paper Misfeed
Type of original Possible trouble
Sheets lightly curled (Curled amount: 10 - 15 mm) Dog-eared, exit failure
Heat sensitive paper Edge folded, exit failure, transport failure
Translucent paper Take-up failure, transport failure
Paper immediately after paper exit from the main unit Take-up failure, transport failure
Paper with many punched holes (e.g., loose leaf) limited
to vertical feeding
Multi-page feed due to flashes from holes
Sheets with 2 to 4 holes Transport failure
Sheets two-folded or Z-folded Transport failure, image deformation
Sheets folded
Image deformation, multi-page feed, take-up
failure
Power requirements
DC 24 V (supplied from the main body)
DC 5 V (supplied from the main body)
Dimensions 404 mm (W) x 318 mm (D) x 60.5 mm (H) (without the original tray)
Weight 2.0 kg