Oki mc760x User Manual

IMAGE ADJUSTMENT
- 111 -
2
1
3
4
5
6
7
 RED & BLACK
1
Press [TWIN COLOR COPY] in the IMAGE
menu.
2
Press [RED & BLACK].
3
To adjust the red color or the red-and-black
area, press [ADJUST]. If you do not want to
adjust the color, press [OK].
If you do not adjust the red color or the red-and-black
area, this is the end of the setting.
If you want to adjust it, go to the next step.
4
Adjust the red color or the red-and-black
area.
Red in original
Press or of yellow or magenta to adjust the
red color balance.
Range Adjustment
Press or to adjust the red-and-black area.
When you set the red area to be larger, the area to be
copied in red becomes larger. When you set the black
area to be larger, the area to be copied in black
becomes larger.
After completing the adjustment, press [OK]. This is the
end of the setting.
If you want to adjust color balance of yellow and magenta
on every density area, press [DETAIL] and go to the next
step.
5
Press or on each density area to
obtain the desired color balance.
For example, when you adjust the high density area of
magenta (M) to the side, the magenta in its high
density area will become darker.
After completing the adjustment, press [OK].
Canceling color balance adjustment
• Move the indicator of the color whose adjustment you want
to cancel to the middle, and then press [OK].
• If you want to cancel the adjustment of all colors, press
[RESET], and then [OK].

Oki mc760x Specifications

General

Brand	Oki
Model	mc760x
Category	All in One Printer
Language	English