USING TEMPLATES
- 225 -
4
On the [RECALL] tab, select a group
containing the template that you want to
use.
• If you select a private template group for which a
password has been set, the password input screen
appears. In this case, proceed to step 5.
• If you select [PUBLIC TEMPLATE GROUP] or a
private template group for which no password has
been set, the template buttons are displayed. In this
case, proceed to step 7.
• If the desired private template group is not displayed
on the screen, use and to switch between
pages.
5
Press [PASSWORD].
6
On the password input screen, enter the
group password the keyboard and digital
keys, and then press [OK].
7
Press [OK].
The template buttons are displayed for the selected
group.
8
Select a “SCAN TO E-MAIL” template that
you want to use.
• If you select a template for which a password is set,
you need to enter the password. In this case, proceed
to step 9.
• If you select a password-free template, the
AUTHENTICATION screen appears. In this case,
proceed to step 12.
9
Press [PASSWORD].
To Next Page
Loading...
Need help?
General
