SETTING ITEMS (ADMIN)
- 292 -
Selecting the SSID from the available network
list
This equipment can search the available SSID automatically
from the wireless network. Then you can select the SSID from
the list.
1
Press [AVAILABLE NETWORK].
The AVAILABLE NETWORK screen is displayed.
2
Select the SSID that this equipment will
connect and press [OK].
The screen returns to the SSID SETTINGS screen.
Note
• The available network may not be displayed according
to the communication environmental conditions.
• If the desired SSID is not displayed, please specify the
SSID manually.
 P.292 "Entering the SSID manually"
• This Wireless LAN supports only channel 1 to 11. This
equipment cannot connect the Access Point that uses
the other channel than these channels. Please make
sure to set the channel between 1 to 11 in the Access
Point.
3
Press [NEXT].
4
The WIRELESS LAN SECURITY SETTINGS
screen is displayed.
Continue to the procedure for specifying the security
mode.
 P.293 "Select security mode"
Entering the SSID manually
1
Press [SSID].
The letter entry screen is displayed.
2
Enter the SSID using the keyboard and
digital keys and press [OK].
The screen returns to the SSID SETTINGS screen.
To Next Page
Loading...
Need help?
General
