Paper handling > 28
L
OADING
CUT
SHEET
PAPER
1. Ensure that the printer is turned ON.
2. Ensure that the Pin Tractor covers (1) are closed to avoid the possibility of paper
jams.
3. Ensure the Paper Type Lever is set to Cut Sheet.
4. To load the cut sheet in the Top Feed Paper Tray, raise the top tray.
To load the cut sheet in the Front Feed Paper Tray, open the front cover and install
the front paper tray.
NOTE
If there are any continuous forms in the printer, eject them as described in
“Removing continuous forms” on page 27.
To Next Page
Loading...
