Oki ML5720 - CLEANING YOUR PRINTER; PRINTER EXTERIOR AND INTERIOR CLEANING

Cleaning your printer > 67
C LEANING YOUR PRINTER
To keep your printer in good operating condition, you are advised to clean it regularly.
P RINTER EXTERIOR
Clean the exterior of the printer as required, but at least every six months or 300 hours of
operation, whichever comes first.
> Moisten a piece of cotton cloth with diluted neutral detergent and carefully wipe the
printer exterior.
P RINTER INTERIOR
Clean the interior of the printer every 6 months or 300 hours of operation, whichever comes
first.
Using a soft cloth, cotton swabs and a vacuum cleaner, clean the interior of the printer as
follows:
WARNING!
Set the printer Power Switch to OFF and disconnect the power
cable from the printer before cleaning the printer.
CAUTION!
Keep the Top Cover closed to avoid the possibility of detergent
entering the printer
WARNING!
As the print head becomes hot during printing, allow it to cool
before carrying out any cleaning inside the printer.
Do not use any flammable solvents for cleaning the printer to avoid
any risk of fire or electric shock.
WHERE TO CLEAN WHAT TO CLEAN
The carriage and the area around it Clean and remove paper
waste, dirt, dust and ribbon
shreds.
The paper travel surface
CAUTION!
When you clean the interior of the printer with a vacuum cleaner,
do not attempt to clean any parts smaller than the suction nozzle.
Do not clean any interior working parts with the suction nozzle to
avoid possible damage to the printer.