Operating instructions > 58
> To feed the paper backward by a small amount (1/180 in), press the LOAD/EJECT
and LF/FF buttons together.
7. When the paper is positioned at the required TOF, release the buttons in Step 6
above.
To save this position as the TOF, press and hold the SEL button and then press the
LF/FF button.
NOTE
> Press the TEAR button to move the continuous form down before
adjusting the TOF.
> For ML5720/ML5721: the specified correction range is
± 20/144 in
> For ML5790/ML5791: the specified correction range is
± 30/180 in.
To Next Page
Loading...
