Paper handling > 20
5. Lift the locking lever (1) of the left Pin Tractor and slide
the Pin Tractor as required to adjust the paper position
relative to the first horizontal character centre mark (2).
Press the locking lever back down to lock the Pin Tractor
in the desired position.
6. Lift the locking lever (1) of the right Pin Tractor and slide
the Pin Tractor to the required position to accommodate
the width of the continuous forms to be used. Move the
rear paper guide (2) to midway between the left (3) and
right (4) Pin Tractors.
1
2
1
2
3
4
To Next Page
Loading...
