Oki ML6300FB - Page 49

Troubleshooting > 49
Print blurring
The characters are
too pale to display
properly on the
paper.
The Paper
Thickness lever
position does not
match the paper.
Correct the Paper
Thickness lever
setting.
The printer is set
to print at high
speed.
Set the speed to
normal.
The ribbon has
reached its end of
life.
Replace the ribbon by
a new one.
The ribbon
cartridge is not
installed correctly.
Reinstall the ribbon
cartridge correctly.
The ribbon has
been wound
incorrectly.
Replace the ribbon
cartridge by a new
one.
The ribbon is not
transferring
properly.
Replace the ribbon
cartridge by a new
one.
A line of print is
missing.
Broken wire pins. Contact your dealer.
Problem Cause Action