Oki Pro8432WT User Manual

- 22 -
Preparing Your Printer
1
1. Setup
Turning Off the Power
1
Hold down the power switch (1) for
about a second.
The message “Shutting down Please wait.
Printer will turn off automatically” appears
in the operator panel, and the power switch
indicator blinks every 1 second. Then the printer
turns off automatically and the power switch
indicator goes out.
Note
● It may take about 5 minutes to turn off the power.
Wait until it turns off.
● Holding down the power switch for more than 5
seconds turns off printer forcibly. Only perform
this procedure when a problem occurs. For printer
problems, refer to “Other Issues” P.83.
1
 When the Printer is Not Used for a
Long Time
When the printer is not used for a long time due
to consecutive holidays or when on vacation, or
when changing or attaching parts in repair or
maintenance, unplug the AC cord.
Memo
● The printer will not be functionally impaired even if left
unplugged for a long time (more than 4 weeks).
Power Save Mode and Deep Sleep Mode
Two-phase power conservation enables you to
save on power consumed by the printer.
 Power Save Mode
When your printer is not used for a certain
period of time, it automatically enters the power
save mode to reduce the power consumption.
You can enter the power save mode manually
by pressing the <POWER SAVE> button on the
operator panel.
The <POWER SAVE> button lights up green
while in this mode.
Memo
● By factory default, the time interval before entering the
power save mode is set to 1 minute. For how to change
the time that elapses before the printer enters the power
save mode, refer to “Setting the Time that Elapses Before
Entering the Power Save Mode” P.58.
 Deep Sleep Mode
Your printer goes from the power save mode to
the deep sleep mode after a set period of time.
The <POWER SAVE> button blinks while in the
deep sleep mode.
Note
● The printer does not enter the deep sleep mode if an error
occurs.
Memo
● By factory default, the time interval before entering the
deep sleep mode is set to 15 minutes. For how to change
the time that elapses before the printer enters the deep
sleep mode, refer to “Setting the Time that Elapses Before
Entering the Deep Sleep Mode” P.59.
Reference
● For more detailed information on deep sleep mode, please
refer to the User’s Manual (Advanced).

Oki Pro8432WT Specifications

General

Brand	Oki
Model	Pro8432WT
Category	Printer
Language	English