Oki Pro8432WT User Manual

- 23 -
Preparing Your Printer
1
1. Setup
 Restoring a Printer from the
Power Saving Mode
To restore the printer from the power save
mode or the deep sleep mode, press the
<POWER SAVE> button on the operator panel.
Memo
● When the printer receives a print job from a computer or
other devices, it is restored automatically.
Auto Power Off Function
When a certain period of time elapses after
printing, this printer will turn off automatically.
Memo
● The factory default setting for time that elapses before the
printer power turns off automatically is 4 hours.
● For how to change the time that elapses before the
printer power turns off automatically, refer to “Settings for
Turning Power Off Automatically (Auto Power Off)” P.62.
Note
● In the factory default setting, the auto power off mode
is disabled during network connection. To enable the
auto power off mode during network connection, refer to
“Settings for Turning Power Off Automatically (Auto Power
Off)” P.62.
Installing Options
This section explains how to install options on
your printer. The following options are available:
● Additional RAM (256 MB or 512 MB)
● 16 GB SD memory card kit
● Wireless LAN module
Note
● Be sure to turn off your printer and unplug the AC cord
and Ethernet or USB cable before installing options.
Installing options while your printer is turned on may
damage your printer and options.
Memo
● After installing options, set the option settings with a
printer driver. Refer to “When Adding Options” P.44.
Installing Additional RAM
Install additional RAM to increase the memory
capacity of your printer in cases such as if
memory overow or the collate print errors occur.
Your printer supports 256 MB and 512 MB RAM.
Note
● Use only genuine Oki Data products. The performance
cannot be guaranteed when using other products.
● The static electricity may damage parts. Discharge the
static electricity from your body by touching grounded
metallic parts, etc., before work.
Memo
● For banner printing, installing additional memory is
recommended.
1 Turn off your printer, and then unplug
the AC cord and Ethernet or USB cable.
Reference
● “Turning Off the Power” P.22
2 Open the access cover (1) on the right
side of a printer.
1

Oki Pro8432WT Specifications

General

Brand	Oki
Model	Pro8432WT
Category	Printer
Language	English