Oki Pro8432WT User Manual

- 31 -
Connecting to a Computer
1
1. Setup
Network Connection
Perform the following procedure to connect your
printer to a computer via network.
Connecting an Ethernet Cable
Be sure to connect your printer to a network
with an Ethernet cable before driver installation.
1 Prepare an Ethernet cable (1) and a hub
(2).
Prepare an Ethernet cable (category 5, twisted
pair, straight) and a hub separately.
1
2
2 Turn off your printer and computer.
Reference
● “Turning Off the Power” P.22
3 Plug one end of the Ethernet cable into
the network interface connection (3) on
the back of the printer.
4 Plug the other end of the Ethernet cable
into the hub (2).
3
2
Connecting in Wireless LAN
(Infrastructure Mode) (Optional)
Note
● In a wireless LAN environment, the machine enters sleep
mode, but does not enter deep sleep mode.
● Do not place any devices (especially microwave
ovens or digital cordless telephones) that emit weak
electromagnetic waves near the machine.
● Install the machine near a wireless LAN access point or
wireless device with no obstacles between them (the
distance should be within 30 m).
● Wireless connections may be difcult if there is any metal,
aluminum framed windows, or reinforced concrete walls
between the machine and the wireless LAN access point.
● Wireless LAN connections may have slower transmission
speeds, depending on the environment, than wired LAN
or USB connections. We recommend using a wired LAN or
a USB connection to print large amounts of data, such as
photographs.
 To choose a valid default gateway
1
Press the scroll button several times
to select [Admin Setup] and press the
<ENTER> button.
2 Enter the administrator password using
the numeric (0-9) keys, and press the
<ENTER> button.
The factory default password is “999999”. Press
the <ENTER> button after each character you
input.
3 Press the scroll button several times
to select [Network Setup] and press
the <ENTER> button.
4 Press the scroll button several times
to select [Enabling Default Gateway]
and press the <ENTER> button.
5 Press the scroll button to select
[Wireless(Infrastructure)].
6 Press the <ENTER> button.

Oki Pro8432WT Specifications

General

Brand	Oki
Model	Pro8432WT
Category	Printer
Language	English