Oki Pro8432WT User Manual

- 104 -
Replacing Consumables and Maintenance Units
4
4. Maintenance
Replacing the Fuser Unit
Life Span of Fuser Unit
When the “Fuser Unit Near Life” message
appears on the display screen, prepare a
replacement fuser unit. You can keep printing
approximately 1,500 pages until the next
message appears.
When the “Change Fuser Unit” message
appears, replace the fuser unit.
The life expectancy of the fuser unit is up to
50,000 pages for A4 simplex printing.
Note
● The actual number of pages you can print with the fuser
unit depends on how you use it.
Note
● Though opening and closing the output tray may extend
the life of the fuser unit somewhat, you should replace it
soon after “Change Fuser Unit” is displayed to prevent
malfunction.
● If you replace the fuser unit, use it until the end of its
useable life. If you remove the fuser unit and install and
use another one before its usable life has expired, the use
life will not be correctly displayed.
● Press the scroll button
or and select [Admin Setup] >
[Panel Setup] > [Near Life Status], if this is set to
[Disable], then the “Fuser Unit Near Life” message
does not appear.
Replacement Procedure
Note
● Do not expose the image drum to direct sunlight or very
bright interior light (approximately more than 1500 lux).
Even under the normal interior light, do not leave it for
more than 5 minutes.
1 Prepare a new fuser unit.
2 Turn off your printer by pressing the
power switch.
Reference
● “Turning Off the Power” P.22
3 Insert your nger into the recess on
the right side of the printer and pull the
front cover open lever (1) to open the
front cover (2) forward.
1
2
4 Press the output tray open button (3)
and open the output tray (4).
CAUTION
Possible to get
burned.
● Since the fuser unit gets hot, carry out the
operation carefully, and when lifting it up
you must hold it by the handle. Do not try to
hold it whilst it is hot. Wait until it has cooled
down and then carry out the operation.
3
4
5 Pull forward the left locking lever (5) of
the fuser unit to unlock.
5

Oki Pro8432WT Specifications

General

Brand	Oki
Model	Pro8432WT
Category	Printer
Language	English