- 62 -
Settings for Turning Power Off Automatically (Auto Power Off)
2
2. Printing Basic Operation
●● Settings for Turning Power Off Automatically
(Auto Power Off)
Note
● In the factory default, a printer does not enter the auto power off mode while connecting to the network.
Setting the Auto Power Off
To enable the auto power off mode while
connecting to the network perform the following
procedure.
1 Press the scroll button or on the
operator panel.
2 Press the scroll button several times
to select [Admin Setup], and press the
<ENTER> button.
3 Enter the administrator password, using
the numeric (0-9) keys.
The factory default password is “999999”. Press
the <ENTER> button whenever inputting one
character.
4 Press the <ENTER> button.
5 Press the scroll button several times
to select [Power Setup], and press the
<ENTER> button.
6 Press the scroll button several times
to select [Auto Power Off], and press
the <ENTER> button.
7 Press the scroll button or to select
[Enable], and press the <ENTER>
button.
8 Press the <ON LINE> button to exit the
menu mode.
To Next Page
Loading...
Need help?
General
