To Next Page

To Previous Page

- 52 -

Printing in Custom Sizes

2. Printing Basic Operation

●● Printing in Custom Sizes

To load custom size paper, you need to register the width and length of the paper before printing. The

range of the sizes you can set differs according to the paper tray.

Tray Available size range

Tray1 Width:

105 to 297 mm (4.1 to 11.7 inches)

Length:

148, 182 to 431 mm

(5.8, 7.2 to 17.0 inches)

MP tray Width:

64 to 297 mm (2.5 to 11.7 inches)

Length:

90 to 431 mm (3.5 to 17.0 inches)

Note

● [Custom] is displayed only when [Paper Size] is set to

[Custom].

1 Press the scroll button or on the

operator panel.

2 Press the scroll button several times

to select [Menus] and press the

<ENTER> button.

3 Check that [Tray Conguration]

is selected and press the <ENTER>

button.

4 Press the scroll button several times

to select [Tray Cong] of the paper

tray in which you loaded paper and then

press the <ENTER> button.

5 Check that [Paper Size] is selected and

press the <ENTER> button.

6 Press the scroll button several times

to select [Custom] and then press the

<ENTER> button.

7 Press the <BACK> button.

Oki Pro8432WT User Manual

Questions and Answers: