Oki Pro8432WT - Page 54

- 54 -
Printing in Custom Sizes
2
2. Printing Basic Operation
For OS X PS Printer Driver
Note
● In the OS X printer driver, paper size out of the available
range can be set, however, image is not correctly printed.
set paper size within available range.
1 Open the le you want to print.
2 From the [File] menu, select [Page
Setup].
3 Select [Manage Custom Sizes] from
[Paper Size]
4 Click [+] to add an item to the list of
custom paper sizes.
5 Double-click [Untitled] and enter a
name for the custom paper size.
6 Enter the dimensions in the [Width] and
[Height] boxes.
7 Click [OK].
8 Click [OK].
9 From the [File] menu, select [Print].
10 Congure other settings if necessary and
then start printing.
 Open the le you want to print, and print
it in the following procedures.
For Windows PS Printer Driver
1
From the [File] menu, select [Print].
2 Click [Preferences] or [Properties].
3 Select the [Paper/Quality] tab.
4 Select [Multipurpose Tray] from
[Paper Source].
5 Click [Advanced].
6 Click [Paper Size] and select a paper
size from the drop-down list.
7 Click [OK].
8 Start printing.
For OS X PS Printer Driver
1
From the [File] menu, select [Print].
2 Select the paper size from [Paper Size].
3 Select [Paper Feed] from the panel
menu.
4 Select [All pages From] and then select
[Multi-Purpose Tray].
5 Start printing.
Memo
● If setting details are not displayed in the print dialog
box for OS X, click [Show Details] at the bottom of
the dialog box.