- 70 -
When Paper Jams Occurs/When an Error Message does not Disappear Even After Jammed Paper is Removed
3
3. Troubleshooting
3 Remove all four image drums and place
them on a at surface.
4 Cover the removed image drums with
paper so that the image drums are not
exposed to light.
5 Remove the jammed paper remaining
inside of the unit.
6 Lift the left lock lever (5) of the fuser
unit forward.
5
7 Hold the fuser unit handle (6) and lift
the fuser unit out of the printer.
6
8 Lift the release levers (7) on the fuser
unit, and pull out the jammed paper
forward gently.
7
To Next Page
Loading...
