2.
Press and hold both map lamp buttons on the bottom
of
the mirror, between five and eight seconds, until
the zone number appears in the display.
3.
Press the right lamp button to increase the zone
numbers or press the left lamp button to decrease the
zone numbers. After you have selected your zone
number, the display will show a compass direction
after five seconds. (Compass calibration may
be
necessary. See “Compass Calibration” following.)
Compass
Calibration
To
place the compass into calibration mode, press both
map lamp buttons and hold for
over
eight seconds
until
the
letter
“C”
is
displayed in the mirror
compass window.
The mirror can be calibrated
in
one of two ways:
Drive the vehicle in circles at
5
mph
(8
kdh) or less
until the display indicates a direction, or
Drive the vehicle on your everyday routine.
2-45
To Next Page
Loading...
Need help?
General
