2.
3.
4.
5.
6.
7.
8.
9.
Pull the taillamp housing away from the body
ol:
the vehicle
(B).
Squeeze the tab
on
the bulb socket and turn the
socket right to left.
Pull out the bulb socket.
Pull the bulb out
of
the socket. (There are four
bulbs
on
each taillamp.)
Push in
a
new
bulb.
Replace the bulb socket into the housing and turn to
the right.
Replace the taillamp housing to the body
of
the vehicle.
Install the wing nuts.
Windshield Wiper Blade Replacement
1.
Pull the windshield wiper arm away from
the windshield.
IO.
Tighten the plastic nuts.
2.
While holding the wiper arm away
from
the glass,
push the release clip from under the blade
connecting point and
pull
the blade assembly down
toward the glass to remove
it
from the wiper arm.
3.
Push the new wiper blade securely on the wiper arm
until you hear the release “clip” into place.
For wiper blade replacement length and type, also see
“Capacities and Specifications”
in
the Index.
6-38
To Next Page
Loading...
Need help?
General
