3.
Push the COAST/SET
button on your steering
wheel and release it.
Once you’re going about
25
rnph
(40
km/h)or more,
press the RES/ACCEL
button on your steering
wheel. You’ll go right back
up to your chosen speed and
stay there.
4.
Take your foot
off
the accelerator.
The
CRUISE light on the instrument panel cluster will
come on after the cruise control has been set to the
desired speed.
It
will go
off
when you:
step lightly
on
the brake pedal,
0
press CLEAR on the steering wheel or
0
press the CRUISE button on the instrument panel.
Resuming
a
Set Speed
Suppose you set your cruise control at a desired speed
and then you apply the brake. This, of course shuts off
the cruise control. But you don’t need to reset
it.
Increasing Speed While Using Cruise Control
There are two ways to go to a higher speed:
0
0
Use the accelerator pedal to get to the higher speed.
Press the COAST/SET button on the steering wheel,
then release the button and the accelerator pedal.
You’ll now cruise at the higher speed.
Press the RES/ACCEL button on the steering wheel.
Hold it there until you get up to the speed you want
and then release the switch. (To increase your speed
in
very small amounts, press the RES/ACCEL
button for less than half a second and then release it.
Each time you do this, your vehicle will
go
1
mph
(1.6
km/h)
faster.)
2-36
To Next Page
Loading...
Need help?
General
