Shoulder Belt Height Adjuster
Before you begin to drive, move the shoulder belt
adjuster to the height that is right for you.
To
move it down, squeeze the release lever and move
the height adjuster to the desired position. You can move
the adjuster up just by pushing up on the shoulder belt
guide. After you move the adjuster to where you want it,
try to move it down without squeezing the release lever
to make sure it has locked into position.
Adjust the height
so
that the shoulder portion of the
belt
is
centered on your shoulder. The belt should be
away from your face and neck, but not falling
off
your shoulder.
1-13
To Next Page
Loading...
Need help?
General
