Programmable Automatic
Power
Door
Locks (ADL)
Programmable Automatic Power Door Locks is a
standard feature intended
to
provide enhanced security
and convenience by automatically locking and
unlocking vehicle doors. The automatic locking and
unlocking of the vehicle will occur if the ignition key is
in
ON
and the driver’s door is closed when the vehicle is
shifted out
of
PARK (P). One of four operating modes
may be selected and programmed by the driver:
Mode
1:
No
automatic door lock
or
unlock.
Mode
2:
Automatic all door lock when transaxle shifted
out of PARK (P).
No
automatic door unlock.
Mode
3:
Automatic all door lock when transaxle shifted
out of PARK
(P).
Automatic all door unlock when
transaxle shifted into PARK
(P).
Mode
4:
Automatic all door lock when transaxle shifted
out of PARK
(P).
Automatic driver’s door only unlock
when transaxle shifted into PARK
(P).
The operating mode of the Programmable Automatic
Power Door Locks will be changed when the driver
performs the following sequence with the doors closed
and the ignition key is in
ON.
1.
Press and hold the power door lock switch
in
the
lock position to change this feature.
2.
While holding the door lock switch, cycle the
transaxle out of and back into PARK
(P).
3.
After an initial transaxle cycle, each additional cycle
will increment the operating mode by one, starting
from the current operating mode.
4.
During this customization procedure, the Automatic
Door Lock and Unlock functions shall operate as
defined by each mode listed, providing the customer
with feedback of the current operating mode.
5.
If cycled beyond mode
4,
the vehicle shall enter
operating mode
1.
When the door lock switch is
released, the vehicle shall remain in the most recent
operating mode.
The Programmable Automatic Power Door Locks will
be in operating mode
3
when the vehicle is shipped from
the factory.
Disconnecting the battery for up to a year will not
change the programmed mode
of
the Programmable
Automatic Power Door Locks.
2-6
To Next Page
Loading...
Need help?
General
