Automatic Transaxle Operation
Your automatic transaxle
has
a
shift lever on the
console between the seats.
Maximum engine speed is limited on automatic
transaxle vehicles, when you’re in PARK
(P)
or
NEUTRAL
(N),
to protect driveline components from
improper operations.
There are several positions for your shift lever.
PARK
(P):
This locks your front wheels. It’s the best
position to use when you start your engine because your
vehicle can’t move easily.
It is dangerous to get out of your vehicle if the
shift lever is not fully in
PARK (P)
with the
parking brake firmly set. Your vehicle can roll.
Don’t leave your vehicle when the engine is
running unless you have to.
If
you have left the
engine running, the vehicle can move suddenly.
You or others could be injured.
To
be sure your
vehicle won’t move, even when you’re on fairly
level ground, always set your parking brake and
move the shift lever to
PARK (P).
See “Shifting Into
PARK (P)”
in the Index.
If
you’re pulling
a
trailer, see “Towing a Trailer” in
the Index.
2-20
To Next Page
Loading...
Need help?
General
