How
to Reset
the
CHANGE
OIL
Light
After changing the engine oil, the system must be reset
1.
2.
3.
With the ignition key in
ON
but
the
engine off, fully
push and release the accelerator pedal slowly three
times within five seconds.
If
the CHANGE OIL light flashes, the system
is resetting.
Turn
the key
to
OFF,
then start
the
vehicle. If
the
CHANGE
OIL
light comes back on, the engine oil
life monitor has not reset. Repeat the procedure.
What to
Do
with Used Oil
Did you know that used engine oil contains certain
elements that may be unhealthy for your skin and could
even
cause cancer? Don’t let used oil stay on your skin
for very long. Clean your skin and nails with soap and
water, or a good hand cleaner. Wash or properly throw
away clothing or rags containing used engine oil. (See
the manufacturer’s warnings about the use and disposal
of oil products.)
Used oil can be a real threat to the environment.
If
you
change your own oil, be sure to drain all free-flowing oil
from the filter before disposal. Don’t ever dispose of oil
by putting
it
in the trash, pouring it on the ground, into
sewers, or into streams or bodies of water. Instead,
recycle it by taking it to a place that collects used oil.
If
you have a problem properly disposing of your used oil,
ask your retailer,
a
service station or a local recycling
center for help.
6-15
To Next Page
Loading...
Need help?
General
