To
replace your battery:
1.
Insert a flat object like a dime into the slot on the
back
of
the transmitter. Gently pry apart the front
and back.
2.
3.
4.
5.
Gently pry the battery out
of
the transmitter.
Put the new battery into the transmitter as shown
on
the transmitter (use a type
CR2032
battery).
Put the two halves back together. Make sure the
halves are together tightly
so
water won’t get in.
Resynchronize and then test the transmitter.
Resynchronizing Your Remote Keyless
Entry Transmitter
After you have changed the battery in your keyless
entry transmitter, you will need to resynchronize the
transmitter.
To
do this, press the
LOCK
and
UNLOCK
buttons together and hold for approximately seven
seconds (or until the horn chirps three times). You will
need to use this procedure
if
your vehicle has lost
battery power for an extended period
of
time.
-
To Next Page
Loading...
Need help?
General
