SCAN:
Press this button and release it to listen to
stations for a few seconds. The radio will go to
a
station,
stop for a few seconds, then go on to the next station.
Press the button again to stop scanning. The sound will
mute while scanning, and SCAN will appear on the
display. If you press SCAN for more than two seconds,
the radio will change
to
P SCAN mode.
P
SCAN will
appear
on
the display.
PUSHBUTTONS:
The five numbered pushbuttons let
you return to your favorite stations. You can set up to
15
stations (five AM,
five
FMl
and five
FM2).
Just:
1.
2.
3.
4.
5.
6.
Turn
the
radio
on.
Press AM-FM to select the band.
Tune
in
the desired station.
Press
TONE
to select the equalization that best suits
the type of station selected. (This function is not
available on the Bose radio.)
Press and hold one of the five numbered buttons.
The sound will mute. When it returns, release the
button. Whenever you press that numbered button,
the station you set will return and the tone that you
selected will also be automatically selected for that
button. (The tone will not automatically return on the
Bose radio.)
Repeat the steps for each pushbutton.
P SCAN:
Press SCAN for more than two seconds, and
P
SCAN
will appear on the display. The radio will go to
the first preset station stored
on
your pushbuttons, stop
for a few seconds, then go on
to
the next preset station.
Press SCAN again to
stop
scanning.
Setting the Tone
BASS:
Press this knob lightly
so
it extends. Turn the
knob to increase or decrease bass. When you use this
control, the radio’s tone setting will switch to manual.
(The radio’s tone setting will not switch to manual on
the Bose radio.)
TREB:
Press this knob lightly
so
it extends.
Then
pull
the
knob all
the
way out.
Turn
the knob to increase or
decrease treble. When you use this control, the radio’s tone
setting will switch to manual. (The radio’s tone setting will
not switch to manual on the Bose radio.) If a station is
weak or noisy, you may want to decrease the treble.
Push these knobs back into their stored positions when
you’re not using them.
TONE:
This
feature allows you
to
choose preset bass and
treble equalization settings designed for
jazz,
vocal, pop,
rock and classical stations.
JAZZ
will appear on the
display when
you
first
press TONE. Each time you press
it,
another setting will appear on the display. Press it
again after CLASSIC appears and
MANUAL
will appear.
3-15
To Next Page
Loading...
