10.
Attach the cable at least
18
inches
(45
cm) away
from the dead battery, but
not
near engine parts that
move. The electrical connection is
just
as good
there, but the chance
of
sparks getting back to the
battery
is
much less.
11.
Now start the vehicle with the good battery and run
the engine for a while.
If
it won’t start after a few tries, it probably
needs service.
12.
Try to start the vehicle with the dead battery.
13.
Remove the cables in reverse order to prevent
electrical
shorting.
Take care that they don’t touch
each other
or
any other metal.
A.
Heavy Metal Engine Part
B. Good Battery
C.
Dead Battery
To Next Page
Loading...
