2.
Push the latch plate into the buckle until it clicks.
Pull up on the latch plate to make sure it
is
secure.
When the shoulder belt is pulled out all the way, it
will lock.
If
it
does, let it go back all the way and
start again.
If
the belt
is
not long enough, see “Safety
Belt Extender” at the end
of
this section. Make sure
the release button on the buckle is positioned
so
you
would be able
to
unbuckle the safety belt quickly if
you
ever had to.
3.
To
make the lap part tight, pull down on the buckle
end
of
the belt
as
you pull up
on
the shoulder part.
1-28
To Next Page
Loading...
Need help?
General
