3
Installing the fax driver
3-4 d-Color MF201
3.1.2 Windows Vista
Detail
Before using this machine in a network environment, the network settings must be specified for this
machine. For details, refer to the User manual – Network Administrator.
To install the printer driver under Windows Vista, log on as the Administrator.
This manual describes the setup method using the Add Printer Wizard only for the LPR/Port9100
printing.
This manual describes the setup method of USB connection only using the Plug and Play.
Setup method Connection method Refer to
Connection
method that
can be set up
with an installer
Network
connection
Port9100 Select the connection method in the course of installation.
Select "Normal Printing" for Port 9100 or USB connection.
USB
Connection
method that
can be set up
with the Add
Printer Wizard
Network
connection
LPR "Installing the fax driver using the Add Printer Wizard" on page 3-5
"For Windows Vista" on page 3-8
Port9100
USB
Connection
method that
can be set up
with Plug and
Play
USB "Installing the fax driver using Plug and Play" on page 3-12
"For Windows Vista" on page 3-13
To Next Page
Loading...
Need help?
General
