d-Color MF201 5-3
Troubleshooting
5
5 Troubleshooting
5.1 Unable to Fax
This chapter explains the troubleshooting procedures for possible malfunctions.
Perform the following troubleshooting procedures, in order, if the fax cannot be sent after the send command
is applied.
If the problem persists after all of these procedures have been performed, read the User manual – Copy
Operations, User manual – Network Scan/Fax/Network Fax Operations or User manual – Print Operations.
Symptom Probable cause Action
The message "No printers
are connected." or "Print
error" appears.
The fax driver specified for faxing may not
be compatible with the printer controller.
Check the printer name selected.
The network cable, or USB cable is dis-
connected.
Check that the cable is connected prop-
erly.
An error has occurred in this machine. Check this machine’s control panel.
Available memory space is not sufficient. Perform a test print to check whether fax-
ing is possible.
The machine does not start
faxing although the printing
operation was completed
on the computer.
The fax driver specified for faxing may not
be compatible with the printer controller.
Check the printer name selected.
The network cable, or USB cable is dis-
connected.
Check that the cable is connected prop-
erly.
An error has occurred in this machine. Check this machine’s control panel.
A print job is queued in this machine, de-
laying printing.
Check the job order on the Active Jobs
list of the machine’s control panel.
If the account track settings have been
applied, an unregistered department
name (or password) may have been en-
tered.
Enter the correct department name (or
password).
Available computer memory space is not
sufficient.
Perform a test print to check whether fax-
ing is possible.
The connection of this machine to the
network is not yet established (while con-
necting to a network).
Consult with the network administrator.
To Next Page
Loading...
Need help?
General
