3
Installing the fax driver
3-14 d-Color MF201
3.3.3 For Windows 2000
1 After using a USB cable to connect this machine to a computer, turn on the computer.
– Do not disconnect or connect the cable while the computer is starting up.
2 Insert the printer driver DVD into the computer’s DVD drive.
3 Turn the main power of this machine on.
The Found New Hardware Wizard starts up.
4 Select "Search for a suitable driver for my device (recommended)", and then click the [Next] button.
5 Select "Specify location", and then click the [Next] button.
6 Specify the desired folder on the DVD that contains the fax driver, and then click the [Open] button.
– Select the specified folder according to the printer driver to be used, the operating system, and the
language.
7 Click the [OK] button, and then follow the on-screen instructions.
– If digital signature warning message appears, click [Yes].
8 Click the [Finish] button.
9 When installation is complete, make sure that the icon of the installed printer appears in the Printers
window.
10 Remove the DVD from the DVD drive.
This completes the fax driver installation.
To Next Page
Loading...
Need help?
General
