d-Color MF201 4-13
Setting up the fax driver (Windows)
4
4.4 Specifying the Basic tab settings
4.4.1 Specifying a custom size
If sending an original of a custom size, or if the recipient is using a custom paper size, you can specify the
paper size by following the procedure described below.
1 From the "Original Size" or the "Paper Size" drop-down list, select "Custom Size".
The Custom Size Settings dialog box appears.
2 Specify settings for the following:
– Width: Specifies the width of the custom paper size according to the selected measurement unit.
– Length: Specifies the length of the custom paper size according to the selected measurement unit.
– Unit: Selects the measurement unit that specifies the size.
3 Click the [OK] button.
Item Function
Original Orientation Specifies the orientation of the original.
Original Size Specifies the paper size of the original.
Paper Size Specifies the output paper size of the recipient. Automatically enlarges or reduces
when the Original Size setting is changed.
Zoom Specifies the enlargement and reduction ratio.
[Account Track] Specifies the department name and password when performing account track on this
machine.
To Next Page
Loading...
Need help?
General
