Olivetti d-Color MF201 Manual

d-Color MF201 3-5
Installing the fax driver
3
3.2 Installing the fax driver using the Add Printer Wizard
As an example, the following describes the installation procedure via a network connection (LPR/Port9100).
When using the LPR/Port9100 printing, specify the port during the printer driver installation process.
3.2.1 Settings of this machine
Before using this machine in a network environment, the network settings must be specified for this machine.
IP address setting for this machine
Specify the IP address on IP Address setting of this machine.
!
Detail
For details on specifying the IP address of this machine, refer to the User manual – Network
Administrator.
Specifying the RAW port number for this machine
To use Port9100 printing, enable the port setting with the software switch (mode 384) of this machine, and
specify the RAW port number (default setting is "9100") in Network Settings.
!
Detail
For details on port setting of this machine, refer to the User manual – [Network Administrator].
LPD setting for this machine
To use LPR printing, enable the LPD setting with the software switch (mode 384) of this machine.
!
Detail
For details on LPD setting of this machine, refer to the User manual – Network Administrator.

Olivetti d-Color MF201 Specifications

General

Brand	Olivetti
Model	d-Color MF201
Category	All in One Printer
Language	English