2-46 d-COLOR MF654/MF554/MF454/MF364/MF304/MF254
Loading paper
2
2.8
How to load paper
1 Open the Bypass Tray.
% To load large-sized paper, pull out the Tray Extension.
% To load banner paper, install the Mount Kit MK-730 for
banner paper.
NOTICE
Exercise care not to touch the surface of the Paper Feed Roll-
er with your hands.
2 Load paper with the print side facing down, then align the Lat-
eral Guide to the paper.
% Insert paper into the tray until their edges are pressed
against the back.
NOTICE
Do not load an excessive number of sheets such that the top
of the stack is higher than the
,
mark.
If paper is curled, flatten it before loading it.
3 Select the paper type and paper size.
% When loading paper other than plain paper, change the paper type setting.
% When loading custom sized paper, change the paper type setting.
% For details, refer to the User's Guide CD/DVD.
To Next Page
Loading...
Need help?
General
