2-4 d-Color MF 3300/3800
2
[Sound Settings]
To display: [Utility] - [Accessibility] - [Sound Settings]
Select whether or not to output keying or warning sounds. If necessary, adjust the volume.
[Brightness Adjustment]
To display: [Utility] - [Accessibility] - [Brightness Adjustment]
Adjust the brightness level of the Touch Panel.
[0] is specified by default.
Settings Description
[Set All] Collectively specify all sounds. If necessary, adjust the volume at three levels.
Selecting [OFF] will result in no sound being output.
[Input Confirmation
Sound]
Select whether or not to output the following operation confirmation sounds.
To output sounds, adjust the volume at three levels.
• [Input Confirmation Sound]: A sound produced when a key is tapped to en-
ter a character.
• [Invalid Input Sound]: A sound produced when a tapped key is invalid.
• [Basic Sound]: A sound produced when the default value item is selected
for an option subject to rotational switching.
[ON] or [Medium] is specified by default in every case.
[Successful Completion
Sound]
Select whether or not to output the following successful completion sounds.
To output sounds, adjust the volume at three levels.
• [Operation Complete Sound]: A sound produced when an operation has
ended normally.
• [Transmission Complete Sound]: A sound produced when a communica-
tion has ended normally.
[ON] or [Medium] is specified by default in every case.
[Completed Prepara-
tion Sound]
Select whether or not to output the completed preparation sound when this
machine is placed into the ready state. To output sounds, adjust the volume at
three levels.
[ON] or [Medium] is specified by default.
[Caution Sound] Select whether or not to output the following caution sounds. To output
sounds, adjust the volume at three levels.
• [Low Caution Sound (Level 1)]: A sound produced when a message ap-
pears on the Touch Panel indicating that the replacement time is nearing
for consumables or replacement parts.
• [Low Caution Sound (Level 2)]: A sound produced when the user has made
a mistake while operating this machine.
• [Low Caution Sound (Level 3)]: A sound produced when an error, which can
be dealt with by referring to messages or manuals, has occurred.
• [Severe Caution Sound]: A sound produced when this machine detects an
error that will require checking by a service representative.
[ON] or [Medium] is specified by default in every case.