d-Color MF 3300/3800 5-29
5.8 [Fax Settings]
5
[Network Fax Settings]
To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Network Fax Settings]
Change the settings of Internet fax environment and the default compression type of data to be transmitted.
Settings Description
[Compression Type] Change the default compression type to transmit an Internet fax.
[MMR] is specified by default.
[Internet Fax Receive
Ability]
This machine notifies its reception capability when returning a MDN message
if you are using the Internet Fax function. If necessary, change the reception
capability of this machine, which is notified upon returning a MDN message.
[Compression Type] Change the compression type of a fax job the machine can receive.
[MH/MR/MMR] is specified by default.
[Resolution] Change the resolution of a fax job the machine can receive.
[Standard/Fine/Super Fine/Ultra Fine] is specified by default.
[Internet Fax Extend
Settings]
Configure settings for fax reception confirmation (MDN/DSN) to be sent by this
machine if you are using the Internet fax function.
[MDN Request] Select whether or not to request for fax reception result (MDN request) to the
destination.
If a MDN request is sent, the recipient machine returns a response message
upon reception of a fax, so that you can check that the fax is successfully re-
ceived by the destination.
Also, by receiving a response message from the destination, you can obtain
the reception capability information of the destination. When a new response
message is received from a destination registered in the address book, the ca-
pability information is overwritten with new information.
[ON] is specified by default.
[DSN Request] Select whether or not to request for fax reception result (DSN request) to the
destination mail server.
If you select [ON] for [MDN Request], priority is given to the MDN request.
[OFF] is specified by default.
[MDN Response] Select whether or not to return a response message when a sender requests
for fax reception result (MDN request) to this machine.
[ON] is specified by default.
[MDN/DSN Re-
sponse Monitoring
Time]
If necessary, change the waiting time for a response from the destination after
a MDN request or DSN request is sent by this machine.
If a response message is received after the specified waiting time, the machine
ignores the message.
[24 hours] is specified by default.
To Next Page
Loading...
Need help?
General
