d-Color MF 3300/3800 5-19
5.7 [Printer Settings]
5
[Quality Settings]
To display: [Utility] - [Administrator Settings] - [Printer Settings] - [Quality Settings]
Adjust the image quality of the printed image.
Settings Description
[Color Mode] Select whether to print an image in color or gray scale.
[Color Mode] is specified by default.
[Brightness] Adjust the brightness of the printed image.
[0] is specified by default.
[Halftone] Select the halftone processing method for each of the [Image Printing], [Text
Printing], and [Graphics Printing] categories.
• [Line Art]: Intermediate colors are reproduced with high precision.
• [Details]: Intermediate colors are reproduced in detail.
• [Smooth]: Intermediate colors are reproduced smoothly.
The following shows the default settings.
• [Image Printing]: [Details]
• [Text Printing]: [Line Art]
• [Graphics Printing]: [Details]
[Edge Enhancement] Select whether or not to sharpen edges for each of the [Image Printing], [Text
Printing], and [Graphics Printing] categories.
The following shows the default settings.
• [Image Printing]: [OFF]
• [Text Printing]: [ON]
• [Graphics Printing]: [ON]
[Edge Strength] Select the degree of edge enhancement when sharpening the edges.
[Medium] is specified by default.
[Economy Print] Select whether or not to adjust the printing density in order to save the amount
of toner consumed.
[OFF] is specified by default.
[PCL Settings] Adjust the image quality for PCL printing.
[Contrast] Adjust the contrast of the printed image.
[0] is specified by default.
[Image Printing] Select the RGB image data processing method.
• [RGB SOURCE]: Specify the color space of the input RGB. [sRGB] is spec-
ified by default.
• [RGB Intent]: Specify the color conversion property that is changed from in-
put RGB to device CMYK. [Photographic] is specified by default.
• [RGB Gray]: Specify the printing method of black and gray colors.
[Bk=CMYK Gray=CMYK] is specified by default.
[Text Printing] Select the RGB text data processing method.
• [RGB SOURCE]: Specify the color space of the input RGB. [sRGB] is spec-
ified by default.
• [RGB Intent]: Specify the color conversion property that is changed from in-
put RGB to device CMYK. [Vivid] is specified by default.
• [RGB Gray]: Specify the printing method of black and gray colors. [Bk=K
Gray=K] is specified by default.
[Graphics Printing] Select the RGB graphic data processing method.
• [RGB SOURCE]: Specify the color space of the input RGB. [sRGB] is spec-
ified by default.
• [RGB Intent]: Specify the color conversion property that is changed from in-
put RGB to device CMYK. [Vivid] is specified by default.
• [RGB Gray]: Specify the printing method of black and gray colors. [Bk=K
Gray=K] is specified by default.
[PS Settings] Adjust the image quality for PostScript printing.
To Next Page
Loading...
Need help?
General
