5-18 d-Color MF 3300/3800
[Printer Settings]
5
5.7
5.7 [Printer Settings]
[Startup Page Setting]
To display: [Utility] - [Administrator Settings] - [Printer Settings] - [Startup Page Setting]
Select whether or not to print the start page when turning this machine on.
[OFF] is specified by default.
[Auto Continue]
To display: [Utility] - [Administrator Settings] - [Printer Settings] - [Auto Continue]
Select whether or not to continue printing when the paper size and type of print job are different from that of
the paper loaded in the paper tray.
[OFF] is specified by default.
[Paper Settings]
To display: [Utility] - [Administrator Settings] - [Printer Settings] - [Paper Settings]
Specify the paper to be used ordinarily.
[Hold Job Timeout]
To display: [Utility] - [Administrator Settings] - [Printer Settings] - [Hold Job Timeout]
Specify the time period during which a print job is stored on the HDD.
- Select from [1 Hour], [4 Hours], [1 Day], or [1 Week].
- When not holding a print job, select [Disable].
[Disable] is specified by default.
Settings Description
[Paper] Specify the size and type of the paper to be printed ordinarily.
• [Paper Size]: Select the paper size when using standard-size paper. The
default value depends on the region the machine is used in.
• [Custom Size]: Enter the width and length of paper when using custom-size
paper.
• [Paper Type]: Select the type of the paper to be used. [Plain Paper] is spec-
ified by default.
[Measurement Unit Set-
ting]
Select a system of units for the paper to be used ordinarily from [mm] or [Inch].
The default value depends on the region the machine is used in.
To Next Page
Loading...
Need help?
General
