d-Color MF 3300/3800 4-3
4.1 [System Settings]
4
4 [User Settings]
4.1 [System Settings]
[Language Selection]
To display: [Utility] - [User Settings] - [System Settings] - [Language Selection]
Select a language to display information on the Touch Panel.
[Measurement Unit Setting]
To display: [Utility] - [User Settings] - [System Settings] - [Measurement Unit Setting]
Select a measurement unit for numeric values displayed on the Touch Panel from [mm] and [Inch].
The default value depends on the region the machine is used in.
[Paper Tray]
To display: [Utility] - [User Settings] - [System Settings] - [Paper Tray]
Specify the settings related to selection and switching of paper trays.
[Auto Color Level Adjustment]
To display: [Utility] - [User Settings] - [System Settings] - [Auto Color Level Adjustment]
When setting the color mode to [Auto Color] to scan an original, adjust the standard to judge whether the
original is in color or black and white. The standard can be adjusted at five levels.
[2] is specified by default.
Settings Description
[Language Selection
Display]
Select a language to display information on the Touch Panel.
The default value depends on the region the machine is used in.
Settings Description
[Auto Tray Select] When you have selected [Auto] in [Paper], select target paper trays for auto tray
selection. The machine selects the tray loaded with optimal paper among the
trays set to [ON].
[ON] is specified by default in every case.
[Auto Tray Switching] When the paper tray has become empty during printing, select whether or not
to enable automatic switching to a paper tray that contains paper of the same
size, same orientation, and same type (ATS: Auto Tray Switch).
However, ATS is available for the paper tray that is selected in [Auto Tray Se-
lect].
[OFF] is specified by default.
[Print Lists] Select a paper tray to print out various lists such as the configuration list or
counter list.
[Tray 1] is specified by default.
[Auto Paper Selection] Specify whether or not to automatically select the tray with [User1] or [User2]
loaded when [Auto] is selected for [Paper].
[OFF] is specified by default in every case.
To Next Page
Loading...
Need help?
General
