CHAPTER 18
Loading Different Types of Paper
POWERING OF THE PRINTER
The printer can be powered from the mains using the external AC power supply unit provided.
Connection of the power supply unit to the mains outlet:
1 Insert the plug of the external AC power supply unit cable in the outlet of the printer
2 Insert one end of the power supply cable in the power supply unit and the other end of the same cable
in the electric outlet.
To load: Proceed as follows:
Plain paper, coated
paper, glossy paper,
photo paper,
greeting cards,
index cards, post
cards, envelopes,
transparencies,
ink-jet labels
• Load the media vertically against the right side of the paper support and with
the print side facing up.
• Squeeze and slide the paper guide against the left edge of the paper.
note: Load letterhead paper with the top of the letterhead entering the printer
first and facing up.
Banner paper • Remove all paper from the paper support.
• Insert the leading edge of the banner paper vertically into the printer against
the right side of the paper support and with the print side facing up.
note: Do not use perforated fan-fold banner paper.
• Squeeze and slide the paper guide against the left edge of the banner paper.
Iron-on transfers • Read the instructions on the transfer package.
• Load the sheets vertically against the right-hand side of the paper support and
with the side to be printed facing towards the front part of the machine.
• Squeeze and slide the paper guide against the left edge of the transfer.
To Next Page
Loading...
