CHAPTER 110
INSTALLATION OF THE PRINTER VIA BLUETOOTH (BLUETOOTH MODEL)
Printing on the Bluetooth wireless connection is possible if this capability is integrated in the computer
or if an external Bluetooth device has been installed (e.g. a Bluetooth USB pen). The Bluetooth function
must be active on the printer.
The range of the Bluetooth system is usually around 10 meters but may vary according to the
characteristics of the environment in which it is installed.
The printer supports the Bluetooth 1.2 Class 2 communication system for connection to compatible
computers and cellphones.
The method of installation varies according to the type of use of the printer.
Activation of Bluetooth
The printer is configured for use of Bluetooth from compatible cellphones and does not require any
type of installation.
To verify whether the Bluetooth capability is available, check that the blue led of the Bluetooth icon is ON.
If the blue led of the Bluetooth icon is OFF, proceed as follows:
• In the Windows environment:
1 Carry out USB installation as described in the documentation "Setting up your printer"
note: If installation has already been performed, it is not necessary to repeat it.
2 Open the Toolbox program (Start > Programs> Olivetti> Olivetti Toolbox).
note: The USB cable must be connected and the printer must be ON.
3 Click on the "Settings" button and then on "Bluetooth Settings" to access configuration of
Bluetooth parameters.
4 Enable Bluetooth mode and click on "Send settings": wait for automatic reception of the data of the
Bluetooth network present: the blue light on the printer lights up.
Close the "Toolbox" program.
5 The printer is not able to operate in the Bluetooth environment.
If a password is requested in the connection phase, enter "0000" (or other if set by the user) using the
"Toolbox" application (Start > Programs> Olivetti> Olivetti Toolbox).
• In the Mac OS X environment:
1 Carry out USB installation as described in the documentation "Setting up your printer".
note: If installation has already been performed, it is not necessary to repeat it.
2 Run the Toolbox program from the desktop.
note: The USB cable must be connected and the printer must be ON.
3 Click on the "Settings" button and then on "Bluetooth Settings" to access configuration of
Bluetooth parameters.
4 Click on "Bluetooth Status". Activate Bluetooth mode and wait for automatic reception of the data
of the Bluetooth network present: press "Apply".
Close the "Toolbox" program.
5 The printer is not able to operate in the Bluetooth environment.
If a password is requested in the connection phase, enter "0000" (or other if set by the user) using the
"Toolbox" application (Start > Programs> Olivetti> Olivetti Toolbox).
USB installation and Bluetooth printing from computer in the Windows environment
Printing on the Bluetooth wireless connection is possible if this capability is integrated in the computer
or if an external Bluetooth device has been installed (e.g. a Bluetooth USB pen). The Bluetooth function
must be active on the printer.
• In the Windows environment
1 Carry out USB installation as described in the documentation "Setting up your printer".
2 Activate Bluetooth mode on the computer (depends on the Bluetooth device installed).
Make a note of the COM port that the Windows system has associated with the Bluetooth channel (In
the Windows Xp environment, the Bluetooth icon is available in the systray in order to search for the
devices connected; for other operating systems, consult the manufacturer's manual).
To Next Page
Loading...
Need help?
General
