USING YOUR PRINTER FROM A COMPUTER 29
USING THE WEB SERVER (WIFI MODEL)
Permits simple, trouble-free management of the printer (set as network peripheral). This function is
available only if the Wireless connection (Wi-Fi mode) has been activated from the Toolbox program.
Using the internet (WEB) browser, it is possible to check status, to configure network parameters or
access printer functions.
When using the printer network mode, care must be taken when entering network keys in order to use
it correctly.
The settable network keys are of the WEP type (Wired Equivalent Privacy) or WPA.
WPA stands for Wi-Fi Protected Access. This method provides interoperable protection based on
standards to promote a considerable increase the level of data protection and access control for a
wireless LAN. To improve data encryption, WPA uses TKIP (Temporal Key Integrity Protocol). For stricter
user authentication, WPA implements EAP/PSK (Extensible Authentication Protocol).
note: WPA supports two basic solutions: Enterprise and Home/ SOHO. In the Enterprise environment
with IT resources, the WPA access is used together with an authentication server for management and
control of a centralized access. In a Home/SOHO environment, WPA is executed in a special home
mode called PSK (Pre-Shared Key) which uses manually-entered passwords or keys for protection. PSK
is designed for simple installation by the user at home or in a small office.
note: Toolbox software with Wi-Fi settings is compatible with the Windows 2000/XP,
Macintosh OS X 10.2 version or higher environment.
Accessing the Web Server Mode
Follow the procedure described below to access the “Web Server” mode:
1 From the system browser, enter the IP address of the printer in the address field of the browser (if this
has been set manually) or from the menu Start > Programs > SIMPLE_WAY Wi-Fi > Configuration.
note: In the Macintosh OS X 10.2 or higher environment, it can be run from Toolbox > Settings >
Settings Wi-Fi.
The Login Page of "Web Server" mode is displayed.
In the navigation menu of the Login Page, Enter the Password.
2 The Web page of the printer can be used to:
– Check printer status
– Display network statistics
– Set network configuration
– Scan pages on the network.
3 Click on Apply to confirm the settings.
note: The default password is "admin123".
note: Modifying the wireless network settings of the Web Server, the connection may be lost. If the
connection is lost, it may be necessary to use new settings for reconnection. If the Server Web loses the
network connection, it may be necessary to restore the pre-defined values and reinstall the software.
note: It is not possible to disable TCP/IP (Transmission Control Protocol/ Internet Protocol).
This protocol is necessary for communication in "Web Server" mode.
To Next Page
Loading...
Need help?
General
